EP50 Series - 50MM DIAMETER ENCODER
5-24 VDC, 8mm diameter output shaft, NPN or PNP output, 45 - 1024 divisions per revolution, BCD, Binary or Gray Code output, Choice of output increasing with CW or CCW rotation

E30S Series - 30MM DIAMETER ENCODER
5-24 VDC, 5 VDC Line Driver Output, 4mm diameter shaft, NPN open collector, NPN voltage or Line Driver outputs, 100 to 1024 pulses per revolution, quadrature output with or without Z (zero index) pulse.

E40S Series - 40MM DIAMETER ENCODER
5-24 VDC, 5 VDC Line Driver Output, 6 or 8mm  diameter shaft, Totempole, NPN open collector, NPN voltage or Line Driver outputs available, 1 to 3600 pulses/rev, quadrature output with or without Z (zero index) pulse

E40H/HB Series - 40MM HOLLOW SHAFT ENCODER
5-24 VDC, 5 VDC Line Driver Output, 6, 8, 10 or 12mm diameter hollow (H) shaft hollow built-in (HB) shaft, Totempole, NPN open collector, NPN voltage or Line Driver outputs available, 1 to 3600 pulses/rev, quadrature output with or without Z (zero index) pulse

E50(ENB) Series - 50MM DIAMETER ENCODER
5-24 VDC, 5 VDC Line Driver Output, 8mm diameter shaft, Totempole, NPN open collector, NPN voltage or Line Driver outputs, 1 to 3600 pulses/rev, quadrature output with or without Z (zero index) pulse

E68S Series - 68MM DIAMETER ENCODER

5 VDC, 15mm diameter output shaft, Line Driver Output, 1024 pulses per revolution, quadrature output with Z (zero index) pulse, 17 pole connector for external connections

E80H Series - 80MM HOLLOW SHAFT ENCODER
5-24 VDC, 5 VDC Line Driver Output, 30 or 32mm diameter hollow shaft, Totempole, NPN open collector, NPN voltage or Line Driver outputs, Available 60 - 1024 pulses per revolution, quadrature output with or without Z (zero index) pulse

E100H Series - 100MM HOLLOW SHAFT ENCODER
5 VDC, diameter hollow shaft, NPN open collector, NPN voltage or Line Driver outputs, 256/30, 1024/30 or 1024 pulses per revolution, quadrature output with Z (zero index) pulse for Line Driver only, Used for elevator systems only

ENA Series - FOOT MOUNTED ENCODER
5-24 VDC, 10mm  diameter output shaft, Totempole, NPN open collector or NPN voltage outputs, 1 to 3600 pulses/rev, quadrature output with or without Z (zero index) pulse, 4 or 5 pole connector, Flexible coupling included

ENC Series - WHEEL TYPE ROTARY ENCODER
5-24 VDC, Totempole, NPN open collector or NPN voltage outputs, Wheels available to measure 1mm, 1cm, 1m, 0.01yd, 0.1yd or 1yd (Wheels included with encoder), quadrature output, 2 meter cable included

ENH Series - HANDLE TYPE ROTARY ENCODER
5-24 VDC,  5 VDC Line Driver Output, Totempole, NPN voltage or Line Driver outputs available, 25 or 100 pulses/rev, quadrature output, click stop position available either "High" or "Low" output, Suitable for manual positioning